866.368.8663
CHAT WITH US

Ironaway UD42 In Wall Ironing Board

Price: $618.00
    Item #: UD42WDU
    There are no reviews yet. | Write a review

    Features:

    • 42" Ventilated Board
    • 4" Adjustable Swivel
    • Hot Iron Storage
    • Electrical System (Rocker Switch, Lighted Switch, Safety Switch, Outlet)
    • Storage Shelf
    • Full Length Piano Hinge and Door Hardware
    • Garment Bar
    • Spotlight/Less Bulb
    • Unfinished Flush Wood Door (Maple Veneer Unfinished)
    • Built-In Safety Switch
    • Fully assembled and ready to install (needs 110V)

    What side would you like the hinge?

    Door Type


    Accessory Options:

    Update price

    In Wall Ironing Board IronAWay UD-42

    This Ironing center is designed for a person in a seated position. Our metal ventilated board differentiates itself from the earlier wooden ironing boards. The traditional built-in wooden board only needed to be hard for the dry irons of the day. Today�s advanced steam irons are designed to project bursts of steam to penetrate deep into the fabric. This allows for removing wrinkles with less effort. Yet, using them on a wooden ironing board caused a build-up of condensation on the board and hot spots when ironing. Our metal ventilated board allows steam to pass through the fabric keeping the surface dryer and providing a more even-heated ironing surface.

    Our metal ventilated board differentiates itself from the earlier wooden ironing boards. The traditional built-in wooden board only needed to be hard for the dry irons of the day. Today�s advanced steam irons are designed to project bursts of steam to penetrate deep into the fabric. This allows for removing wrinkles with less effort. Yet, using them on a wooden ironing board caused a build-up of condensation on the board and hot spots when ironing. Our metal ventilated board allows steam to pass through the fabric keeping the surface dryer and providing a more even-heated ironing surface.

    Not only is it convenient to store your iron inside the unit, but the location keeps the iron out of children�s reach.There�s no reason to let your iron cool down, the insulated heat shield allows for immediate shelving.The hot iron storage area has been designed to accept the majority of steam/dry irons available at retail, including many premium models.

    Storage is not a problem with our ironing centers!All models will include an additional storage shelf, our 60" wood cabinets include two storage shelves. Keep all your ironing aids in one handy location!

    No place to leave your iron when moving or turning your garment?Place the iron in this handy heat resistant iron rest. This allows for more usable space on the ironing board while making your garment adjustments.This feature is standard on all 46" ironing boards and Model UD-42.

    These features allow for only the amount of cord required to iron by using the electrical cord cover or wrap. You can easily guide the iron and eliminate the excess cord from getting in your way.

    These features are standard on all models numbers containing an "E" which defines "Electrical". The 60" cabinets will contain the electrical cord cover and the 52" cabinets will contain the cord wrap.

    The garment bar is helpful when you have more than just a few garments to iron. The garment bar can hold multiple clothes hangers, making it more convenient to perform continuous ironing. This feature is standard on all other models except the IAW-42.

    Do you want to create an environment that provides optimal surroundings when ironing out all the wrinkles?

    When ironing garments in insufficiently lighted areas, our spotlight will enhance your ability to iron out those sometimes not found hard to spot creases and crevices.

    Models come standard with a flat maple unfinished veneer door. All wood doors come unfinished and can be stained or painted to match your decor. White doors do not require finishing. Mirror is full length, 1/4" plated glass with polished edge. Mirrored door is shipped separate for added protection. No door option is available to match your cabinetry. Keep in mind the door hardware is not included when ordering a "No Door." This consists of the Piano Hinge, Roller Catch Assembly, and Garment Bar. If you would like a "Door Hardware Kit," add them by choosing this option within the Optional Features section.

    All models come standard with a wood door. Metal Door Overlays come painted and ready to install over the standard wood door. Metal Door Overlay attaches to front of wood door with permanent mounting tape.

    Door Hardware consists of a Garment Bar, Roller Catch, and the Piano Hinge. When placing an order for an ironing center, if you choose the no door option, all door Hardware attached to door will not be included and you will receive a price reduction. If you want the door hardware included, but not attached; please select this option from the Optional Features Section. The door hardware will be added back into the overall total.

    The Maytag Smart Fill - M800 is a trendy iron and steamer in one. The innovative removable water tank allows you to fill it while the iron is heating. Heating takes less than one minute with the new speed heat technology. The iron�s innovative controls for water spray and steam surge provides dramatic results. The stainless steel sole plate enables the smoothest glide and the 360 degree tangle free cord offers the ultimate freedom of motion. This iron�s quality, design, and function will compliment your IRON-A-WAY ironing center.

    The sleeveboard is placed on top of the main board and used when you want to iron sleeves or smaller garments that won't fit over the nose of your regular ironing board. When in use, the sleeveboard rests on top of the main ironing board, nothing holds it in place. Please note, when not in use the sleeveboard is not stored inside the unit, it must be stored in another location than inside the unit itself.

    Additional Items:

    The kit is necessary if planning to surface mount rather than installing in between studs
    60� Surface Mount Kit used for Models AE-46, E-46, NE-46 and UD-42
    52� Surface Mount Kit used for Models AE-42, E-42, and NE-42
    No Surface Mount Kit necessary for Model IAW-42
    Surface Mount Kit finishes out back sides of unit for flush finish
    Wood pieces can be stained or painted to match cabinet
    Unit will protrude approximate 7� to 8� rather than 3� � 4� depending on which model purchased

    In Wall Ironing Board IronAWay UD-42

    Overall height: 60 5/8�

    Overall width: 15 �

    Overa ll depth including door: 7 3/4 �

    Dimension from wall to outer edge of door (when recessed): 3 7/8 �

    Penetration into opening: 3 7/8�

    Wall opening height: 59 7/8 �

    Wall opening width: 14 3/8 �

    Wall opening depth: 3 7/8

    Unit may be surface mounted ( unit extends approximately 7 3/4 � into room) or recessed (unit extends approximately 3 7/8 � into room) into any wall with standard 16� center studs. � See table bottom right to determine desired ironing board height above the floor. The user can adjust height of board after installation with a 4� differential between a maximum and minimum height. � Unit can be provided with a left hinged door upon request. Right hinge is standard. � Comes standard with wood veneer door. � Electrical requirem ents: 115/120v, 15 amp. Pigtai ls are provided in bottom of wire raceway for hookup to supply line. Make entrance into knockout provid ed in top of wire way through right - hand vent hole. � Recommended to attach 2� x 4� cleats to studs, level with the bottom of opening (for support when recessing unit.) � Door opens approximately 180�. Allow at least 16� to the side of the unit for door to sw ing open (door hinges on full length piano hinge.) � Options include: Surface mount trim (necessary for surface mounting), oak, maple, pine, or white raised panel door, flat white door, glass m irrored door, or no door , sleeveboard, r ough - in kit, and iron

    FEATURED BRANDS

    View All>

    JOIN OUR MAILING LIST

    For inspiration how-to's and savings!